Featured Products

—

View all our products >>

We provide a comprehensive range of products and solutions for the mining and metallurgy industries.

녓
"Maximizing Mining Efficiency and Profitability"

 

We empower scientists and researchers to advance their discoveries with our wide range of high-quality products for biotechnology and chemistry labs, including reagents, instruments, and lab equipment.

녓
"Advancing Scientific Knowledge, One Product at a Time"

 

Providing high-quality materials and innovative solutions for the most demanding material engineering challenges.

녓
"Elevate Your Projects with Our Expertis"

 

넳 넲
Precision Balance
产品代码：EDS-LB-10845
¥ 0.00
Moisture determination balances
Determining moisture content ensures moisture levels are within your required tolerance.
¥ 0.00
ELECTRONIC ANALYTICAL BALANCES
¥ 0.00
Single column electromechanical EMO SERIES
Microtest EM0 Series universal testing systems are single column tabletop electromechanical testing machines suitable for performing tensile, compression, flexure/bend, shear, friction, peel, tear and low-frequency cyclic testing where the maximum required force is less than 10 kN and lab space is limited.
¥ 0.00
Cold Test Bending Machine
UTM-8400 Cold Bending Machine is used for bending and re-bending tests of reinforcing bars, wire rod and wire for concrete in accordance with the requirements of EN ISO 15630-1.
The test piece is bent over a mandrel.The angle of bend and the diameter of the mandrel (D) is selected in accordance with the relevant product standard EN 10080.
¥ 0.00
Electromechanical desktop testing machine – Serie MONOTRAC / DUOTRAC
Compact, ergonomic and modern design, keeping maximum performance, for material testing.

With the right combination of accessories can do the tensile test ISO 6892, ISO 1608, EN 10002-1and ASTM E23, ASTM D695 compression test, bending test ASTM E290, test according to NADCAP, test to rubbers and elastomers on ISO 37, ruber properties ASTM D413, ASTM D412.
¥ 0.00
Micro-Deval Apparatus ASTM
The Micro Deval Testing Machine is used to determine the resistance to wear of aggregates. The machine consists of a steel frame, two stainless steel jar stainless steel spheres (2 pcs) and an automatic digital counter which allows machine to stop automatically at the preset number of revolutions.
¥ 0.00
Digital Sieve Shaker Fritsch Analysette 3 SPARTAN
The Analysette 3 SPARTAN is a basic Digital Laboratory Sieve Shaker.
This Sieve Shaker can be used for all typical sieving tasks in the laboratory, with optical adjustment of the amplitude, while the instrument is running. Complete with a practical sieve stack tensioning system.
¥ 0.00
Concrete compression machine 1300 kN analogue, 1 qauqe
Compression testing machine 1300 kN motorized 1 gauge to test cylinders up to diameter 160x320 mm and cubes up to 150 mm side.
¥ 0.00
Beam Mould
Product Code : EDS-CTLE-11204
Beam moulds are made of 4 plates assembled together.
Lss Germany made of Cast Iron / Mild Steel.
Faces are machined flat to ± 0.2mm.
Each bean mould is supplied complete with base plate.
And finished in size to 0.2mm.
¥ 0.00
Digital Compression Testing Machine
Product Code : EDS-CTLE-11201
The Digital Indicator incorporates a 4-Digits display calibrated in Kilo Newton (KN) and preset to maximum load capacity fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading.
¥ 0.00
Bleeding of Freshly Mixed Concrete
UTC-0720 is used for determination of the relative quantity of mixing water that will bleed from a sample of freshly mixed concrete.
¥ 0.00
Flow Cone Apparatus
Product Code : EDS-CTLE-11361
The apparatus comprises a metal stand supporting the stainless steel cone having inside dimensions of 150 mm inside upper dia. x 280 mm height.
Lss Germany used for determining the flow properties of mortars, grouts, muds and many other type of fluid materials.
¥ 0.00
Automatic Blaine Air Permeability Apparatus
The UTCM- 0280 Automatic Blaine Air Permeability Apparatus perform the test for determining the fineness of cements, limes and similar powders expressed in terms of their specific surface according to the above testing standards. The fineness of cement can be automatically measured as specific surface by observing the time taken for a fixed quantity of air to flow through a compacted cement bed of specified dimensions and porosity.
¥ 0.00
Flow Table
There are two models of the Cement Flow Table according to ASTM and EN standard. Both are used for determining the consistency of mortar, lime and cement specimens. Also manual and motorized models are available.
¥ 0.00
ELECTROMECHANICAL DESKTOP TESTING MACHINE – SERIE TESTCOM
Compact, ergonomic and modern design, keeping maximum performance, for material testing.

With the right combination of accessories can do the tensile test ISO 6892, ISO 1608, EN 10002-1and ASTM E23, ASTM D695 compression test, bending test ASTM E290, test according to NADCAP, test to rubbers and elastomers on ISO 37, ruber properties ASTM D413, ASTM D412.
¥ 0.00
ELECTROMECHANICAL UNIVERSAL TEST MACHINE
¥ 0.00
WATER BATHS
UTGE Series Water Baths are used in various material testing analyses. 15 , 24 and 48 lt. tank capacity models are available and can be ordered with or without cooler units.
¥ 0.00
UNIVERSAL CORING MACHINES
The UTGD-0290 (2500 W) and UTGD-0310 (2200 W) Universal Coring Machines are powerful diamond drilling units serve for shock free wet drilling into concrete, natural stone and asphalt with coring diameter max. 200 mm for UTGD-0290 and coring diameter ranges 25-202 mm for UTGD-0310 respectively. Both models are optimal complements to handheld diamond drilling machines.
¥ 0.00
AGGREGATE SCREEN SHAKER UNITS
The Porta-Screen, Testing Screen and Test Master Sieve Shakers are ideal for particle size determination on large samples of aggregates, sand, gravel, slag, ores, wood chips and other coarse materials.
¥ 0.00
HIQH CAPACITY SIEVE SHAKER
( Aggregates-Rocks )
EN 932-5 ISO 3310-1
Designed for sieving considerable quantities of any material. The sieve shaker can hold six screen trays and dust pan.
Supplied complete with dust pan, but without screen trays (to be ordered separately). It cannot be sold in CE markets without protection (see accessories).

Power supply: 230 V 50 Hz 1ph 750 W
Dimensions: 585x790x850 mm
Weight: 180 Kg approx.

¥ 0.00
VIBRATORY SIEVE SHAKER AS 450 BASIC
The analytical sieve shaker AS 450 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtainable even after very short sieving times.
¥ 0.00
WATER PERMEABILITY TESTERS
Concrete is one of the most used materials in the construction industry. Several variables contribute to define the quality of the concrete utilized for a structure: workability, consistency, setting time and air content are only few examples.
¥ 0.00
BULK CEMENT SAMPLER
( Cement-Mortar )
EN 196-7 ASTM C183 AASHTO T127
Used to sample cement in bulk storages or shipment.
Brass made, it consists of two concentric tubes with slots.
Inside tube volume is 3 litres approx.

● Dimensions: dia. 40x1500mm
● Weight: 5 Kg
¥ 0.00
DIGITAL LENGTH COMPARATOR
E078KIT
Digital length comparator
( Cement-Mortar )
EN 12617-4 EN 1367-4 EN 12808-4 ASTM C151 ASTM C490 NF P15-433 NF P18-427 BS 1881:5 BS 6073 DIN 1164
Length comparator with digital gauge 12.7 mm travel by 0.001 mm divisions mod. S382-01, complete with battery and RS232 connection to PC.
¥ 0.00
넳 넲